PROCESS MONITOR
run up
detector
The Run Up Detector (RUD) is a machine protection monitor designed for simplicity and reliability. It uses two probes to count valid parts and detect defects as they move through a die.
KEY BENEFITS
-
Reduces unexpected machine breakdowns → less damage, downtime, and repair cost
-
Faster setup times, improving productivity
-
Enables detailed evaluation of process failures for better corrective action and efficiency
-
Real-time monitoring confirms each cycle aligns with reference profiles within predefined limits
SPECIFICATIONS
-
Shipping Weight: 5 lbs (2.27 kg)
-
Shipping Dimensions: 18 in x 14 in x 6 in (457.2 mm x 355.6 mm x 152.4 mm)
-
Unit Weight: 1.5 lbs (0.68 kg)
-
Unit Dimensions:
– Height: 141.80 mm (5.58 in)
– Width: 66 mm (2.60 in)
– Depth: 186.80 mm (7.36 in)
20 mm / 7 mm Sensor
Epoxied in a pocket
Proximity Timing Sensor
Mounted on the side of the ram to measure distance
INPUT/OUTPUT
-
Inputs:
– 8 Analog
– 1 Digital
– 110V / 240V Power
-
Outputs:
– 4 Control Relays
8 mm Probe Sensor
Secured in an 8 mm hole
Cam Sensor
Used for part counts, RPM, timing signal, and stopping criteria
ACCEPTED SENSOR TYPES
NEW LIGHTWEIGHT MATERIALS
We have improved our manufacturing process and are now using high-quality black polycarbonate filaments for our monitors. This material can resist bending well, with a flexural strength of 71 MPa, and it can withstand heat up to 293ºF, making it suitable for various environments.​
DOWNLOAD RESOURCES
The RUD Installation & Operator’s Guide provides detailed instructions and helpful information to make setup and daily operation simple. Download the guide below for a complete reference whenever you need it.